Plunger type filling machine
Principle and features:
A, 8 head filling at the same time, according to the need to increase the number of filling head.
Second, fast cleaning, rapid adjustment, vessel frequency conversion stepless speed regulation, suitable for different specifications, different type of container, liquid filling.
Once every three, filling quantity adjustment, each container can be adjusted respectively trace, filling with high precision and good consistency and high speed filling.
Four, the contact liquid materials for stainless steel parts, silicon rubber, conform to the requirement of GMP.
Fifth, man-machine interface and PLC communication, debugging equipment or replacement set only on the screen.
Enter bottles, orientation, filling, filling out the bottle automatic operation.When filling the bottle does not reach the designated position, the equipment will be automatic protection, ruled out after continue to work.
The main technical parameters
1, filling quantity: 100 ml to 5000 ml/bottle (standard liquid materials)
2, filling error: plus or minus 1% or less standard charge
3, plunger metering, filling Numbers: 6, 8, 12 head.
4, power supply voltage: 220 v50hz
5, power: 2.2 kw or less
6, need compressed air pressure: 0.4 ~ 0.6 Mpa
7, speed control, frequency control of motor speed
8, weight: 1000 kg
9, appearance size: 2500 * 1140 * 1140 (mm)
10, output: 1600 bottles/hour (100 ml will be subject to eight head)
Special point
1. The piston filling, used various viscosity liquid, high precision;Piston structure using fast after disassembly facilitate Cleaning and disinfection.
2. PLC control system, frequency control of motor speed, a high degree of automation.
3. The load adjustment is convenient, can be adjusted once all piston filling amount, also can be slightly adjusted for each piston;Simple operation, rapid adjustment.
4. Drip tight device is designed filling needles, filling into the bottom of the bottle filling, slowly rising, reduce blister.
5. The machine is suitable for various specifications of bottles, easy adjustment, it can be finished in a short period of time.
| 
